614 Ispanic Roofers Acacio

614 Ispanic Roofers Acacio

SIDING & PAINTING

614 ispanic roofers acacio is the siding contractor that can provide you with the quality, value, and cost-effective prices you desire. Our customer assistance, quality materials, and extensive expertise are what distinguish us from other competitors.

614 Ispanic Roofers Acacio Process Of Installing Siding

Step 1: Remove the existing trim, fanfold and vapor barrier (if present) and tear it completely. 

Step 2: Inspect exterior materials for rotten wood (replace if necessary) 

Step 3: Rigid foam (1/4-inch extruded polystyrene underlay foam insulation) is installed on flat walls so that the siding can be flattened to insulate the house. 

Step 4: Installing a vapor barrier prevents water from entering the insulation and exterior, preventing mold and exterior rotting. 

Step 5: Installing ducts around the siding of the house used to install vinyl siding sections  

Step 6: Installation of accessory blocks (faucet, outdoor lighting, etc.)  

Step 7: Install the starter strip: Create a caulking line minus 1/4 inch along the outside wall of the house, making sure the starter strip is completely flat and all sections above it are level. 

Step 8: Install the preferred vinyl section, starting at the bottom of the wall  

Step 9: Seals all required areas such as windows and door panels. 

Step 10: A final inspection of vinyl siding installation to ensure that all steps have been properly followed and the siding is holding as intended.  

Siding Options

Provia Options

Cedar Peaks® Brochure

CedarMAX® Brochure

HeartTech® Brochure

Willowbrook™ Brochure

Ultra™ Brochure

Board 'N Batten Brochure

Harbor Mill™ Brochure

James Hardie Options

614 Ispanic Roofers Acacio painting process 

Step 1: Remove any surface imperfections (usually with a pressure washer). B. Peeling or Cracking of Paint 

Step 2: Check the trim board to make sure it is in good condition 

Step 3: Replacement of all rotten or defective veneers 

Step 4: paint all the surfaces you want 

Step 5: A final inspection to ensure that all areas that need painting have been applied.